Method 1: Automatic Installation via Amlogic USB Burning Tool (Recommended)

Navigate to > Advanced options > Startup Settings > Restart .

Windows 10 does not include native drivers for Amlogic chipsets in flashing mode. When you connect your device via a USB Burning Tool or an Android Debug Bridge (ADB) interface, the operating system will likely flag it as an "Unknown Device." Installing the official Amlogic driver ensures:

Upon reboot, press or F7 to select Disable driver signature enforcement .

Open by right-clicking the Start button and selecting it from the menu.

Amlogic processors power millions of Android TV boxes, streaming sticks, and single-board computers worldwide. To flash new firmware, unbrick a device, or developers to interact with the hardware via a PC, installing the correct is essential.

During the installation, a secondary prompt from the will pop up.

: Connect the cable to a native USB 2.0 port on your PC (usually black) rather than a USB 3.0 port (blue), as Amlogic flashing protocols are notoriously sensitive to USB 3.0 controllers. Step-by-Step Installation Methods

What are you trying to accomplish (e.g., upgrading firmware, unbricking)?

Check the Status grid within the software interface. If the driver is active and functioning, one of the lines will change status to .

It is crucial to use the correct driver version for your 64-bit operating system to avoid installation failures. (GitHub Gist) How to Install Amlogic USB Driver on Windows 10 Follow these methods to install the driver properly. Method 1: Using the Installer ( .exe ) Download the driver package and extract it to your desktop. Run Amlogic_USB_Driver.exe (or similar installation file). Click Next and accept the terms. When asked, choose to install device drivers . Click Finish to complete the installation 1.2.4. Method 2: Manual Installation via Device Manager