A: Yes, if the pump is 115V and draws less than 15A. However, keep the timer dry—install a weatherproof cover.
The Chevron Digital Timer EW-32 is a versatile, programmable electronic plug-in timer designed to help you automate your home electronics, lighting, and appliances. By scheduling exactly when your devices turn on and off, you can cut down on energy bills, improve home security while away, and streamline your daily routines.
| Error | Meaning | Solution | |-------|---------|----------| | | No power or dead battery | Plug timer into a live wall outlet. Replace CR2032 battery. | | Flashing 12:00 | Power interruption | Reset the clock (see Section 3). Your programs may still be saved. | | Device turns on/off at wrong time | AM/PM confusion | Check if 6:00 is AM vs PM. Also check the day program (Mo vs Tu). | | Timer clicks but no power | Overload protection or tripped | Unplug all devices. Reset by unplugging timer for 10 minutes. | | Can't set minute to 00 | Normal function | Press – when at 01 to roll back to 00 . | chevron digital timer ew-32 user manual
Used to enter clock-setting mode and switch between 12/24-hour formats or Daylight Saving Time.
Programming the Chevron digital timer EW-32 is straightforward. Here's a step-by-step guide: A: Yes, if the pump is 115V and draws less than 15A
Avoid daisy-chaining multiple timers, extension cords, or power strips together.
Programming the timer is straightforward. It is recommended to use a pen or pencil to press the small reset button before initial setup. Step 1: Setting the Current Time Hold down the button. By scheduling exactly when your devices turn on
The is a 7-day programmable digital timer used to automate electrical devices. Before first use, plug the unit into a wall outlet for at least 14 hours to charge the internal memory backup battery. 1. Initial Setup & Reset
To keep your Chevron Digital Timer EW-32 in good working order, follow these simple guidelines.
can handle multiple programs. Each program consists of an time and an OFF time. Setting Program 1 (ON Time) Press the TIMER button once. The display will show "1 ON" .