Dvb01 User Manual -

Relay closes when the voltage is either below the lower limit or above the upper limit. 4. Parameter Programming (Setting Mode) Enter Settings: Long press to enter the selection interface (displays "P-0"). Select Parameter: Short press to cycle through parameters P-0 to P-5 Function Selection (F-01 to F-05). Lower Limit Voltage (0.0V to 99.9V). Upper Limit Voltage (0.0V to 99.9V). Voltage Calibration (match display to a known voltmeter). Delay for Relay Pull-in (0.0 to 99.9s). Delay for Relay Disconnect (0.0 to 99.9s). Adjust Values: buttons to change values. Use to switch between digits (flashing). Save & Exit: Long press to save all settings and return to normal operation. 5. Special Features

: If VIN drops below V2 OR rises above V1, the relay immediately releases (turns OFF).

The relay closes when the voltage is above the upper limit (V2) and opens when it drops below the lower limit (V1). Ideal for protecting batteries from over-discharge. dvb01 user manual

Voltage monitoring in production lines. 6. Troubleshooting

(Note: Specifications may vary slightly by hardware revision) Relay closes when the voltage is either below

The DVB01 module is known for its stability and high-quality components. Accuracy: ±0.1Vplus or minus 0.1 cap V

Offers flexibility for diverse control needs. Wide Voltage Range: Measures DC voltages from with an accuracy of Select Parameter: Short press to cycle through parameters

DVB01 User Manual: Comprehensive Guide to the Multi-function Voltage Monitoring Controller

DC 5V, 12V, or 24V (depending on the specific model version). Voltage Detection Range: 0–100V DC. Resolution: 0.1V. Relay Load Capacity: 30A/250VAC or 30A/30VDC.

Relay activates when the voltage is higher than the high limit (P₁) and turns off when it drops below the low limit (P₂).

The DVB01 module is a precision voltage monitoring controller designed for industrial automation, battery management systems, and DIY electrical engineering projects. Featuring a real-time digital LED display, micro-controller precision, and flexible relay output control, this device ensures operational safety by continuously tracking direct current (DC) voltage thresholds. 1. Technical Specifications