Locate the Keyboard Language Settings in your manual and scan the barcode that matches your operating system language (e.g., US English, UK English, French, German). The wireless scanner turns off too quickly.
Turn on the barcode scanner by holding down the trigger button. The scanner should automatically pair with the dongle.
Press and hold the scanner trigger for roughly 8 to 10 seconds until the blue light flashes rapidly. This indicates it is in pairing mode. kercan barcode scanner manual
+------------------------------------------+ | [ RESTORE FACTORY DEFAULTS ] | | | | |||||||||||||||||||||||||| | | |||||||||||||||||||||||||| | | |||||||||||||||||||||||||| | +------------------------------------------+ Use code with caution.
The scanner is out of range from its USB receiver. Bring it closer to the computer and re-pair the device. Locate the Keyboard Language Settings in your manual
Scan the configuration barcodes labeled Disable Sleep Mode or Set Sleep Time to 30 Minutes to extend operational uptime.
To make your cursor move to the next line automatically after scanning, you need to add an "Enter" suffix. to enable this feature. 3. Wireless Scanner Specifics (Pairing and Modes) The scanner should automatically pair with the dongle
: Plug the USB cable directly into your computer. The system should recognize it as a "USB HID Keyboard". 2.4G Wireless : Plug the USB dongle into your PC.
One of the most powerful features of Kercan scanners is the ability to change their settings by scanning special programming barcodes. Many models, like the KR-230-EIO, come with a sheet of these codes.
Approve the pairing request. The scanner will beep to confirm a successful connection. 3. Standard Configuration Barcodes
The scanner might be in Virtual COM Port mode instead of USB Keyboard mode. Scan the USB HID Keyboard Mode configuration barcode to fix this.