Visit the NetAlly Support page and download the latest LinkRunner AT Manager application.
: Using protocols like CDP, LLDP, and EDP, the firmware identifies the nearest switch name, port, and VLAN. Protocol Support
LinkRunner AT 1000 is a legacy handheld network tester manufactured by linkrunner at 1000 firmware
Interrupting a file transfer can stall the update process. Disable any aggressive anti-virus scanning or firewall restrictions that might monitor USB storage data streams. Ensure the tester remains plugged into AC power throughout the attempt, as a sudden dip in battery voltage can trigger a disconnect. Device Stuck in a Reboot Loop
Plug the AC adapter into the LinkRunner AT 1000 and connect it to a wall outlet. Power on the LinkRunner AT 1000. Visit the NetAlly Support page and download the
Use LinkRunner Manager to export your testing profiles to your local PC. If you ever need to perform a factory reset down the road, you can restore your customized environments in seconds.
: AllyCare support for these legacy models is scheduled to continue until September 30th, 2027 Replacement Models Power on the LinkRunner AT 1000
Ensure LinkRunner AT battery is or plug in AC adapter.
If the unit freezes on the splash screen after an update, perform a hard reset. Pull out the AA or lithium-ion battery pack completely, unplug the AC power adapter, and let the unit sit empty for 60 seconds. Reinsert the power adapter first, turn the unit on, and attempt to flash the firmware version one more time. Best Practices Post-Update
Optimizing Network Testing: A Comprehensive Guide to LinkRunner AT 1000 Go to product viewer dialog for this item.