Nokia G-010g-r Manual Jun 2026

| Parameter | Value | |-----------|-------| | Model | G-010G-R | | Form Factor | Desktop / Wall-mount | | GPON Standard | ITU-T G.984 | | Downstream | 2.488 Gbps | | Upstream | 1.244 Gbps | | Ethernet Port | 10/100/1000Base-T, Auto MDI-X | | Fiber Connector | SC/APC (green) | | Optical Wavelength | 1490 nm (down), 1310 nm (up) | | RX Sensitivity | -27 dBm | | Power Supply | 12V DC, 0.5A | | Power Consumption | < 3W typical | | Operating Temp | 0°C to 40°C | | Dimensions | ~ 110 x 85 x 28 mm |

What color and behavior () are the PON and ALARM lights showing? Who is your Internet Service Provider (ISP) ?

This is a common point of confusion. Unlike most home routers, the G-010G-R does not provide a full-featured graphical user interface (GUI) for you to configure.

If the light stays solid red, there is likely an area-wide fiber cut or a service outage. Contact your ISP support line. LAN Light is Off nokia g-010g-r manual

into the optical fiber source, as invisible radiation can damage the retina. Environment

The green SC/APC connector where your fiber optic cable plugs in. Warning: Never look directly into the fiber cable or the PON port, as invisible laser radiation can damage your eyes.

No, the G-010G-R is an ONT only. It requires a separate wireless router to provide Wi-Fi. | Parameter | Value | |-----------|-------| | Model

is engineered for high-performance data throughput with a compact physical footprint, measuring roughly 89mm in height and 82mm in width .

The G-010G-R supports up to 1Gbps. If you are getting slow speeds, ensure you are using a Ethernet cable. Older Cat5 cables are limited to 100Mbps. 6. Technical Specifications

: Plug the provided 12V power adapter into the ONT’s power jack and a wall outlet . Unlike most home routers, the G-010G-R does not

: Features one 10/100/1000Base-T (GigE) port with auto-negotiation, capable of bursting to full gigabit speeds dynamically.

Loss of Signal (LOS) detected or hardware failure. Check the fiber line connection. Normal status; no active system alarms. Green (Solid)

"If you don't know what you're doing, that fiber port can damage your eyes," Thorne warns. "The manual isn't just instructions; it's a safety document. It reminds us that we are dealing with light lasers, not just copper wires."

Unplug the power cable from your Wi-Fi router, wait 30 seconds, and plug it back in. Ensure the Ethernet cable connecting the Nokia ONT and your router is securely plugged into the correct WAN port. Frequently Asked Questions (FAQ)

Disconnect the ONT from your router and connect it directly to a computer using an Ethernet cable.