Tutorial | Vijeo Designer 62

Connect your PC to the HMI using a USB transfer cable (XBTZG935) or an Ethernet cable.

Create security levels (e.g., Operator = Level 1, Supervisor = Level 2, Engineer = Level 3).

Under the tab, configure what color the lamp displays when the variable is 0 (Off = Red) versus 1 (On = Green). Displaying Numeric Data

Define trigger conditions based on digital states (e.g., Fault_Bit == 1 ) or analog thresholds (e.g., Temperature > 90 ). vijeo designer 62 tutorial

Select the tool from the Toolchest and place it on the screen.

Start by defining your hardware and communication protocols.

Right-click in the variable list and select (Choose Data Type: BOOL, INT, REAL, STRING , etc.). Connect your PC to the HMI using a

Before launching your project, you must compile the code. Go to . Watch the feedback window at the bottom of your screen. Address any errors or warnings (such as unmapped tags or overlapping objects) until the build finishes successfully. Running the Simulator

: It is highly recommended to enable password protection for downloading and project access. 3. Essential Project Components

Expand the to start drag-and-dropping components: Displaying Numeric Data Define trigger conditions based on

Set up messages (e.g., "Warning: Hydraulic Temperature Exceeded!").

In the project setup wizard (or later in the Navigator under the ), select an equipment communication driver.

: Create a base screen template containing universal elements like header bars, navigation buttons, and system clocks. Apply this template to all subsequent screens to ensure visual consistency.