Do not rely on static IP configuration via the scanner for long-term stability. Instead:

With the right scanner and compatibility tools, you can bridge the gap between your hardware and your HR software in seconds.✅ Real-time monitoring✅ Seamless payroll integration✅ No more "missing" logs

Change your computer's IPv4 network adapter settings to a static IP in the same range, such as 192.168.1.50 . Set your subnet mask to 255.255.255.0 . Step 2: Execute the Scan Using a network scanning tool (like Advanced IP Scanner): Input the target IP range: 192.168.1.1-254 . Start the scan.

Configuration Manual - zkteco.me

I can provide specific configuration steps or direct download guidance based on your hardware. Share public link

: They are designed to ignore environmental "noise" like moving leaves, shadows, or rain.

To find the IP address of a ZKTeco device, you should use the software corresponding to your hardware:

If your computer is on the 192.168.0.X subnet and the ZKTeco device is on 192.168.1.201 , the software might find the device but fail to connect to it.

Never leave a biometric attendance terminal on a dynamic (DHCP) lease. If the router reboots, the IP will change, breaking the connection to your server. Use the scanner to find the device, then toggle its setting to Static IP .

Modifying IP addresses, upgrading firmware, and batch-configuring video surveillance endpoints. 3. Standard ZK_Tool / SDK Utilities

Open your management software (e.g., or ZKBioAccess ). Navigate to the Device or Access Control tab. Click on Search or Search Device .